Funkey Tip Corner: Cleaning your Funkeys!

FUNKEY CLEANING...
OH GOD... FUNKEY CLEANING...
One of the most annoying things ever to rise in UB Funkeys. After prolonged use of Funkeys, their chip gets dirty and they start malfunctioning, however, this can be fixed by cleaning it! Heres how:

1) Unplug the UB hub from USB port and re-plug it in. You can also try plugging into a different USB port.

2) Make sure there is no dirt or dust on the contacts of the UB Hub - run your finger across or use canned air.

3) Check the contacts on the bottom of the funkey - be careful to not scratch the contacts as this may cause the funkey to not work at all. Use canned air or soft cloth to gently wipe contacts.

4) Press down on the head of the funkey sometimes works also and a little wiggle (but be careful not to scratch the contacts).

5) Take a Q-Tip, lightly dip it in rubbing alcohol and gently run it along the bottom of the funkey. Lay the funkey on its side. Give it about 2-3 minutes to dry. Then place it on the U.B Hub. This works better than jiggling the funkey.